We are using the Christmas tree special material that the user is using as the sample. When sampling, ensure that it is absolutely clean and can not be contaminated by any impurity.
2. Analysis of samples
2.1. Analysis of the performance of the sample
The samples were put into a small two roller mill, and then plasticized and evenly distributed. Then they were put out at a certain thickness. Then they were put into rubber vulcanizing machine, heated, pressed and kept for a period of time. After cooling, the samples were removed, and the physical and mechanical properties were tested according to the relevant standards.
2.2. Analysis of the color of the sample
We used the accumulated color plate as a coloring reference, compared with the sample of the special Christmas tree, trying to find the color plate, but not. Find some information, also have no similar color, can only rely on experience to judge the use of color. Carefully observe the sample, and conclude that the sample is made up of three colors of green, yellow and black, which is mainly green.
